• -10%
2024

Fly Wing II

CHF1,219.00
CHF1,097.00 Save 10%

VAT included

JUST FLY!
The 2024 FLY II represents an evolutionary leap from the original model that features new materials, even more advanced 3D flying shapes, and a host of enhancements aimed at improving performance and enhancing the user experience.
Color
Size
JUST FLY!
The 2024 FLY II represents an evolutionary leap from the original model that features new materials, even more advanced 3D flying shapes, and a host of enhancements aimed at improving performance and enhancing the user experience.
Continuing with the unique high lift coefficient concept, it features an even stiffer airframe and a new twist profile, greatly enhancing handling and control in high wind conditions. The canopy tension distribution, originally derived from windsurfing sail design, has been fine-tuned to improve upwind speed and handling through upwind maneuvers. The dihedral front profile has been reshaped for increased stability when sheeted in, particularly beneficial for harness-equipped riders. Additional Leading Edge (LE) segments at the wingtips not only reduce drag but also provide added stiffness, enabling the wing to point higher. The vented strut has been updated with an additional stiffener at the Leading Edge (LE) in the center, enhancing stability in the area ahead of the fill panel, making the wing much more forgiving during tacks.
The FLY II is now constructed entirely from Teijin LE dacron, greatly enhancing its shape durability. The trailing edge panels forward of the frame are made from Challenge Code 95 for exceptional stiffness and long lasting shape control. The back windows now feature a dyneema X-ply for the optimum balance between visibility, light weight and structural integrity, while the front windows are clear PVC. The windows have been redesigned and repositioned to improve visibility.
The wide range of size options between 4.0 and 6.0 are unique to the Fly II. We have simplified the sizing between 1.8 to 3.5 compared to the previous model to make the selection process much easier.
EVOLUTION
A year after introducing the FLY, we have achieved additional development milestones and are proud to unveil the enhanced and refined models: FLY II PRO and FLY II. The development of the FLY concept has been based on using the most proven materials, examining the technical development of wingfoiling down to the smallest detail and adjusting all the set screws
SHAPE DIFFERENCES
The Fly II and Fly II PRO are very close. The major shape differences are the LE diameter (PRO is much smaller) and that - because it has a flatter entry angle to leverage the leading edge (LE) stiffness of the Aluula and reduce drag - the Fly PRO canopy appears slightly smaller when shown as flat pieces.
Transverse Canopy Paneling 
The new wings have much more precise shaping built in, while retaining the transverse paneling that holds it‘s shape under load and stretches much less over time. There are now 4 stitched transverse panels on each side of the wing compared to only 2 in the previous model, vastly increasing shape stability.
Integral Batten System
Sewn-in composite battens create a flat, fast trailing edge with minimum flutter.
Staggered material weights on LE
Thngle.e use of an ultra-light, high-tenacity woven polyester at the wingtips and back of strut results in a very light ‘feel’ due to reduced swing weight.
UNIQUE HANDLE DESIGN
Calibrated positions for effortless balanced flight, ergonomic design to reduce fatigue and position the wing at the optimum flight angle
4045533767323

Data sheet

Year
2024

Specific References

ean13
4045533767323
UPC
889841230148
New product

Video

You might also like

Register

New Account Register

Already have an account?
Log in instead Or Reset password